Double-deck Rollformer

If factory space is limiting your company's prospects for growth, a Profiilikeskus double-deck rollformer offers the best solution to get more out of your premises. Our double-deck rollformer allows you to manufacture two different profiles on one rollformer.

All the machine functions are controlled through an easyto-use screen interface. Rubbered draw-in rollers drive the sheet automatically into the rollforming section. Thanks to this, the upper-level-sheet-entry can also be conveniently done at normal working height. The sheet entry table is hydraulically ascending and descending

• Rollforming sections for two different profiles, post-cutters for the end products, pre-cutter for the flat sheet, automatic stacker.
• Both the lower and upper rollforming sections are driven by their own electric motors. Consequently, stress for the drives and axles is minimized, which results in maximised machine reliability.
• The stacker level is automatically controlled by the machine software. During sheet production, the stacker height is automatically lowered step by step along with the increasing number of completed sheets. As a result, not even the first profile sheets of a stack are ever likely to fall down from a high position, ensuring 100-percent damage-free end products.
• For unloading, the inner part of the dual-frame stacker rises above all the other structures, which enables the safe removal of the completed stack, for example, by a forklift. 

Material Requirements

Thickness

0.45 mm-0.9 mm

Width of strip

1250 mm or for customized width

Coatings

Pre-coated and galvanized

Steel quality

DIN EN 10346: S2220GD+Z - S350GD+Z

The rollformer can be steered from the control unit either in manual or automatic drive. Steering and end programming are made extremely user-friendly. The machine is controlled from a touchscreen and with switches in the control desk.